Home Su Commenti Sommario Ricerca

Two positions head

Home VHS Avantgarde HS Avantgarde HS Performance HS Suprema Accessories

Two position head


The automatic head with two positions is formed by two parts that rotate thanks to a piston-ratchet system, that allows to position the head automatically in the two horizontal and vertical positions.

The automatic head is assembled with a spacer which is also assembled on the main head of the machine.

The automatic head is centered by conical tempered pins.

The grooved shaft, coupled with the dragging devices of the spindle taper, transmits the movement to the spindle of the automatic head.

The rotating surfaces of the two main castings of the by-rotating head (dragging and dragged axes) are machined, scraped and form an angle of 45 compaired to the main spindle.

To reach the head, it is necessary to reach the inside of the safety protections in condition of still-machine.

The equipment can be installed on the machine to make particular machining that, with a fixed head, would not be possible. The automatic head can therefore bear a tool with the following features:

  • Maximum weight: 30 Kg

  • Maximum diameter: 400 mm

  • Maximum tool carrier length from the head to the spindle: 450mm



How to contact us
+39 0523 550157
+39 0523 550158
Postal address
Via Formaleoni, 20 - 29027 Podenzano (PC) Italia
E-mail address

General information: info@STS.pc.it
Sales: commerciale@STSfresatrici.com
Assistance: tecnico@STSservice.net

Customers technical support Sales: tecnico@STSfresatrici.com

Administration: amministrazione@STS.pc.it

Webmaster: tecnico@sts.pc.it


Inviare a tecnico@sts.pc.it  un messaggio di posta elettronica contenente domande o commenti su questo sito Web.
Copyright 2004 STS srl
Ultimo aggiornamento: 27-11-09