HS Avantgarde – Version with 5 axes with electro-spindle.
STS HS Avantgarde milling machines are machines with high speed and high dynamic created from the experience of VHS and are the right solution for all those applications where the extreme performances are not essential and can only end up creating an unbalance of the performance/price ratio.
STS HS Avantgarde milling machines are machines tools created to machine flat surfaces, simple or complex profile grooves, gears etc, by means of an interchangeable tool according to the type of application. The main features of the machine are:
Surface high quality finishing and
High quality dimensional precision of the machined pieces
The machine, with “T” structure, thanks to a head with two continuous axes, allows to machine completely a mould in one positioning.
The T milling machine at high speedHS (High Speed) Avantgarde is particularly indicated for the machining of moulds and models, as, thanks to the possibility to equip the machine with a head with two continuous axes, it is possible to machine completely a mould in one positioning. The table is available in 5 sizes:
2.200 x 800 (950) (1100) mm
2.700 x 800 (950) (1100) mm
3.200 x 800 (950) (1100) mm
3.700 x 800 (950) (1100) mm
4.200 x 800 (950) (1100) mm
and can bear a maximum load of 8.000 Kg.
The strokes of the machine are: longitudinal 2.000 mm, 3.000 mm., 3.500 mm. and 4.000 mm, transversal 1.000 mm., 1.500 mm. and 2.000 mm. and vertical 1.000 mm, 1.500 mm. and 2.000 mm.
Another point of strength of the HS Avantgarde milling machine is the high dynamic. This machine can reach the best performances compaired to the traditional milling machines:
feed speed 40m/min
accelerations of 2,0 m/s2.
The HS Avantgarde milling machine can be equipped both with tool magazines with changing places number, at column edge, or with the rack magazines with eight places to be installed on the working table.
The magazines rack type are particularly suggested for all those users that want a functional tool magazine without investing important sums.
To finish the technical features of the new horizontal HS Avantgarde, we point out that several controls are available:
The system is managed by a numerical control at high technology that allows to use every function of the machine using at the maximum all the capabilities.
The HS Avantgarde milling machine is designed for milling, drilling, tapping holes etc, on medium to large pieces and therefore it is important to guarantee machining precision, execution speed, easy positioning and production low cost.
The structure is over dimensioned and largely ribbed, thermally stabilized.
The movement of the axes is made on guides with recirculating rollers largely over dimensioned and with a pre-load of heavy duty.
The surfaces are where the guides are applied are rectified and scraped..
All the movements of the machines axes and of the automatic tool exchanger group (where foreseen) are checked from numerical control and/or PLC integrated in the same.
The movement transmission chains of the linear axes are made by a toothed belt transmissions and screw coupling, by single screw with recirculating spheres, pre-loaded for the recovery of mechanical gaps.
The detecting systems of the linear axes, of direct type, are made by linear scales (features of changeable type according to the function of the installed numerical control), fixed along the different working strokes.
All the axes of the machine are moved by motors with alternative electricity (brushless).
All the sliding surfaces and the movement parts are protected against dusts and cutting liquids.
The electro-spindle head, at horizontal axis, is complete with automatic tool blocking and unblocking device.
The console of the computerized control unit is in a special container situated on the side of the milling machine (usually near the electric cabinet).
The position of the electric cabinet can change according to the machine model and the available space. Inside the cabinet (protected from infiltrations) are the electric equipment for the axis of the motor and the spindle, the CNC and all the other electrical equipment.
Stay on top of the highest standards of a more and more selective market.
Mandrino con cambio gamma meccanico High Torque – Low Cost
Spindle with mechanical gamma change High Torque - Low cost
Mandrino con cambio gamma meccanico High Torque – High Speed
Spindle with mechanical gamma change High Torque - High Speed
Mandrino diretto High Power– Low Cost
Direct spindle High Power - Low cost
Elettro mandrino High Power – High Speed
Electro-spindle High Power - High Speed
Inviare a firstname.lastname@example.org un
messaggio di posta elettronica contenente domande o commenti su questo sito Web.